BQXKC - PHOTOCONDUCTOR DRUM, 95-7002
- MSDS: BQXKC
- Manufacturer: A B DICK CO
- Product Name: PHOTOCONDUCTOR DRUM, 95-7002
- National Stock Number: 3610-00N038322
Product Identification
Product ID:PHOTOCONDUCTOR DRUM, 95-7002
MSDS Date:08/30/1991
FSC:3610
NIIN:00N038322
MSDS Number: BQXKC
Responsible Party
CHICAGO, IL 60648
US
Emergency Phone: 312-763-1900
Info Phone: 312-763-1900
Preparer: KENNETH W. PINTER
Cage: HO951
Contractor
Telephone: 312-647-8800
Cage: HO951
Ingredients
SUBSTRATE (CYLINDER)
Fraction By Weight: >95%
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 100%
OSHA PEL 15 MG/M3 DUST;5 FUME
ACGIH TLV: 10 MG/M3 DUST;5 FUME
COATING
Fraction By Weight: <5%
ARSENIC SELENIDE
CAS: 1303-36-2
Fraction By Weight: 100%
OSHA PEL 0.5 MG/M3 (AS)
ACGIH TLV: 0.01 MG/M3 (AS)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:YES
Health Hazards Acute and Chronic:INGESTION: PRACTICALLY NON-TOXIC. EYE:
NON-IRRITATING (RABBIT). SKIN: NON-IRRITATING (RABBIT). INHALATION:
PRACTICALLY NON-TOXIC. PRODUCTS OF COMBUSTION ARE TOXIC. AVOID
BREATHING SMOKE.
Explanation of Carcinogenicity:ARSENIC COMPOUNDS: OSHA REGULATED,. 29
CFR 1910.1018, REV. 1, 1 JUL 92 .
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGESTION: CALL MD IMMEDIATELY . EYE: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. SKIN: WASH WITH SOAP AND WATER. INHALATION:
REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE ARTIFICIAL
RESPIRATION/O XYGEN) .
Fire Fighting
Extinguishing Media:WATER, FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WHEN IN A MACHINE TREAT AS ELECTRICAL FIRE,
AND DO NOT USE WATER OR FOAM.
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMPERATURES CAN RESULT
IN MELTING AND PYROLYSIS. FUMES MAY CAUSE RESPIRATORY SYMPTOMS.
DELAYED EFFECTS MAY OCCUR UP TO 72 HOURS.
Accidental Release
Spill Release Procedures:PARTICLES OF COATING DETACHED THROUGH PHYSICAL
DAMAGE MUST BE COLLECTED AND DISPOSED OF AS A CHEMICAL WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE WET PUMICING AND POLISHING
PROCEDURES.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED. WEAR
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:MECHANICAL (GENERAL) ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED WHEN USED AS INTENDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
BOILING POINT: >1256F,>680C.
Chemical Properties
Boiling Pt:B.P. Text:SUPP DATA
Spec Gravity:2.7 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:EXPOSURE TO HIGH TEMPERATURES.
Hazardous Decomposition Products:OXIDES OF SELENIUM AND ARSENIC. (THE
OXIDES ARE TOXIC).
Disposal
Waste Disposal Methods:DO NOT INCINERATE OR DISPOSE OF IN A SANITARY
LANDFILL. IN THE U.S.A. DRUMS TO BE RETURNED TO THE A. B. DICK
COMPANY. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.